Recent Orders
CONTACT US
tel:86-0755-83575155
fax:86-0755-83575189
AC DC 3W power module
HLK-PM12 3W 12V Power module
ITEM ID HLK-PM12
Retail Price:$2.25
Wholesale Price:$2.10
DETAILS
Product features
1. Ultra-thin, ultra-small, smallest volume;
2. Global universal input voltage (90~265Vac)
3. Low power consumption, green environmental protection, no-load loss<0.1W
4. Low ripple, low noise
5. High output short circuit and over-current protection and self recovery
6. High efficiency, high power density
7. Input and output isolation voltage 3000Vac
8. 100% full load aging and testing
9. High reliability, long life design, continuous working time is greater than 100,000 hours;
10. Meet UL, CE requirements; product design to meet EMC and safety testing requirement;
11. Using high-quality environmentally friendly waterproof plastic potting, moisture, vibration, water and dust to meet IP65 standards
12. Economic solutions, cost-effective
13. Work without external circuit
14. 1 year quality guarantee period
Environmental conditions
| Items | Technical Parameters | Units | Notes |
| Working temperature | -25—+60 | ℃ | |
| Storage temperature | -40—+80 | ℃ | |
| Relative humidity | 5—95 | % | |
| Thermal methods | Natural cooling | ||
| Atmospheric pressure | 80—106 | Kpa | |
| Altitude | ≤2000 | m | |
| Vibration | Vibration coefficient 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes | Meets requirements for secondary road transportation |
Electrical characteristics
| Items | Technical Parameters | Units | Notes |
| Rated input voltage | 100-240 | Vac | |
| Input voltage range | 85-265 | Vac | or 70-350Vdc |
|
The maximum input current |
≤0.1 | A | |
| Input inrush current | ≤10 | A | |
| Input low start | ≤50 | mS | |
| Long-term reliability | MTBF≥100, 000 | h | |
|
External fuse recommended |
1A / 250Vac or 10Ω wire wound resistance | Slow blow |
Safety Characteristics
Products designed to meet UL, CE safety certification requirements.
*Safety and electromagnetic compatibility
Designed with the input of 0.5A UL certified insurance;
PCB board using double-sided copper clad plate production, material for the 94-V0 fire rating level;
Safety standards: Compliance with UL1012, EN60950, UL60950
Insulation voltage: I / P-O / P: 2500VAC
Insulation resistance :I / PO / P> 100M Ohms / 500VDC 25 ℃ 70% RH
Conduction and radiation :comply with EN55011, EN55022 (CISPR22)
Electrostatic discharge :IEC / EN 61000-4-2 level 4 8kV / 15kV
RF radiation Immunity: IEC / EN 61000-4-3 See Application Note
*Temperature safety design
At room temperature,the capacitors of this power , the inner surface of the main converter maximum temperature does not exceed 90 ℃;
Shell maximum surface temperature does not exceed 60 ℃
Logo, packaging, transportation, storage
* Product logo
In place of products labeled with signs, its content in line with national standards, industry standards.
* Packaging logo
Products marked with the manufacturer's name, address, zip code, product type, manufactured year, month, day on the box ;
Marked "up", "moisture" "Handle with care" and other transportation signs, all signs are in line with the provisions of GB 191.
* Packaging
Products are separated using special plastic box packaging, with anti-vibration function, and in accordance with the provisions of GB 3873.
* Transport
Packaged products can be shipped by any transportation service, there should be awnings in transport and no excessive vibration, impact, etc.
* Storage
Products should be stored in compliance with GB 3873.
